Plumbing can be an exciting endeavor. No really, it can be. In terms of taking better care, doing your own plumbing repairs to save money is actually quite exciting. To start learning some basics as to how to make this work for you, please be sure to refer to the tips below.
Solder with safety in mind. When you solder a copper pipe you want to direct the flame on the copper pipe. The flame of the torch has to be four inches away from the piping. The flame should be targeted directly at the point where the copper piping needs to be disconnected.
Group all of your plumbing repairs before scheduling a plumber to come out. Check all of your fixtures and faucets. If anything is dripping, running or clogged, make a list for the plumber. That way, when the plumber comes, they can do all of the jobs in one visit. This will cut down on charges.
If your toilet happens to be clogged, and the plunger is not working, you can pour a bucket of hot water down the toilet, but be sure to pour it from a height that is waist level or above so you do not flood the bathroom. Repeat this procedure if necessary as the water returns back to a lower level.
If your sink is letting rusty water out and it will not drain, it is mostly likely because of the biological scum and grease that is built up in the pipes. You need to have your drains professionally cleaned, allowing maximum flow through your drains. Your drains must be open completely.
Set the temperature on your hot water heater to a temperature that does not exceed 120 degrees. This helps to save energy and prevents the water from becoming too hot and potentially scalding someone in your household. Older models that do not have a temperature setting should be set on Medium.
DIY plumbing jobs will require that you understand how to solder copper for the lines for the water supply. You can practice this skill so that you will be able to run your lines without worrying about it leaking. Search online for video tutorials that can help you get a handle on how to go about soldering.
The toilet should never be leaking, so make sure. Try putting drops of food coloring into the tank. Keep your eyes on the toilet bowl, and if the colored water seeps into the bowl, you know that there is an issue with your toilet that you will need to take care of soon.
When you’re going away on a vacation, you should consider shutting off the water supply to your home. This can help stop many problems before they start. If you don’t do this, you should have someone stop by your house regularly to check that nothing has gone wrong and that your home isn’t flooded.
In any DIY plumbing project, make sure that you always test the drains and the supply lines before you close up the walls. It is a lot easier to find and solve problems if you look for them while you are still in the process of actively doing the job.
Always keep a trash bin in the bathroom so that you can dispose of cotton swabs, facial pads, and hair. Do not put these materials in the toilet as they can cause clogs over time and disrupt your water flow. These items will not dissolve or break down when submerged in water.
When you are going to do laundry in your home washing machine, do not use excess detergent, bleach or other chemicals. Too many of these products can cause the natural bacteria in your septic system to be killed. Just use enough of these products in order to get your laundry done.
To prevent hair from clogging your drains, install strainers in each tub and shower to capture the hairs before they can go down the drain. When combined with soap build-up, hair can bring your drains to a complete standstill, so it’s important to prevent the hairs from reaching the pipes in the first place.
So, now do you see why plumbing is such an exciting endeavor? Creating your own skills, learning to take care of your system, and being able to fix it yourself to save money is very exciting. The tips above should have created a good foundation for you to build upon and do your own plumbing jobs easily.